Anatomy of the Narrowed Beam|
Each day, Airkewld sells about 5 Ultimate Beams. Whether or not it is due to the quality of materials we use, the fit and finish or plain old marketing. Either way, the satisfaction rate is it at 97%.
Assembling an Type 3 Ultimate Narrowed Beam|
1. Lift up the front end of the vehicle and place it on jack stands. Make sure the e-brake is on to lock the vehicle in place.
2. Remove the wheels and place under the vehicle.
3. If you are re
Determining stock height or if the suspension has relaxed up front|
Trying to find comparisons is going to be difficult because you will see so many variances. If the torsions up front have relaxed, the vehicle is already lower than stock. If you are to jack the vehi
How to lower your VW Beetle/Ghia the right way|
So you probably just finished reading our article on "Identifying the condition of your Beetle/Ghia suspension" If not, check it out here . You have determined that you want to lower your Beetle/Ghia
How to lower your VW Bus the right way|
We all dream of having a type 2 VW bus. Whether it is one with all the windows or a camper the wife and the kids strapped in and cruising down the road. Sounds good right? You would think.
I did s
Identifying the condition of your Beetle/Ghia Suspension|
Let’s take the necessary steps to ensure the base you are working with is solid and straight.
Check the tire pressure in all your tires to ensure there is 32 psi in them.
Make sure you
Narrowed Beam Analysis - The other guys|
We decided to purchase a 'jig built" narrowed beam from the
competition. We are doing a complete analysis on it to show you the
difference so you the consumer are more educated on these. Narrowed
Narrowing Factory Torsion Leaves|
Specs on torsion leaves from grub screw to grub screw indention.
(Link Pin LP)Stock 18 3/16, (Ball Joint BJ) Stock 18 3/8 front center dimple to outer dimple
Two inch (LP 17 3/16) (BJ 17 3/8) fron
Steering Box Centering|
You have just installed the world finest adjustable beam, the Ultimate Beam. You have the control arm floating in the tubes nicely, the spindles are installed to perfection, it's time to tackle the st
Type 2 Drop Spindle Install|
Split Bus ('55-'67) Dropped Spindle Installation
Installation is basically the reverse of the removal process as described in the Bentley manual. There are some key differences that do need to