Ultimate Adjustable VW Front Ball Joint Beam - 2100

A better way to lower a Classic Volkswagen Type 1 with ball joint front suspension (1966 through 1977) other than utilizing adjusters in the center of the beam is to order an Ultimate Adjustable Front Beam.

The Ultimate Beam (UB) allows you to adjust your ride height from stock height down to *seven inches on average. The UB has Delrin bushings, a steering dampener bracket, and grease-able zerks. The UB can come in stock width, up to 4" narrowed with shock towers. New torsions, tie rods, and shocks are recommended for the best overall user experience. If you don't know what beam makes the most sense, click here.

4" Narrowed is in Stock.

There are three ways to lower your 1966 through 1977 Type 1. Good, Better, Best.

Good - Install a pair of adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 6/18/23 by Pete

Typical time to install - 4 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
9 in stock!

Ultimate Adjustable VW Front Link Pin Beam - 2102

A better way to lower a Classic Volkswagen Type 1 with link pin front suspension (1949 through 1965) other than utilizing adjusters in the center of the beam is to order an Ultimate Adjustable Front Beam.

The Ultimate Beam (UB) allows you to adjust your ride height from stock height down to *seven inches on average. The UB has Delrin bushings, a steering dampener bracket, and grease-able zerks. The UB can come in stock width, up to 4" narrowed with shock towers. New torsions, tie rods, and shocks are recommended for the best overall user experience. If you don't know what beam makes the most sense, click here. This beam replaces the factory beam part number 113401021A.

4" Narrowed and Stock Width LHD are in stock

There are three ways to lower your 1949 through 1965 Type 1. Good, Better, Best.

Good - Install a pair of adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 8/14/23 by Pete

Typical time to install - 4 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
10 in stock!

Stage 1 PRObuilt Adjustable Ball Joint Beam Complete - 2200

The BEST way to adjust a Classic Volkswagen Type 1 with ball joint front suspension (1966 through 1977), up or down, is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 PRObuilt Beam is built on the Ultimate Beam platform. It's made in stock width and up to four inches narrower than OEM to allow for wider wheels, drop spindles, and disc brakes, that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here.

Made in the USA | Product updated 6/14/23 by Pete

Typical time to install - 2 1/2 Hours | Install PDF Link | Install Video | Tools Needed

More Information

12 Weeks on Average

Stage 1 PRObuilt Adjustable Link Pin Beam Complete - 2201

The BEST way to adjust a Classic Volkswagen Type 1 with link pin front suspension (1949 through 1965), up or down, is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 PRObuilt Beam is built on the Ultimate Beam platform. It's made in stock width and up to four inches narrower than OEM to allow for wider wheels, drop spindles, and disc brakes, that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here. This beam replaces the factory beam part number 113401021A.

Made in the USA | Product updated 6/15/23 by Pete

Typical time to install - 2 1/2 Hours | Install PDF Link | Install Video | Tools Needed

More Information

12 Weeks on Average

Classic VW PRObuilt Link Pin Drum Drop Spindles - 2441

The Best option for installing drop spindles on your 1949 through 1965 Classic Volkswagen Type 1 Beetle and Karmann Ghia for the link pin application is this set of PRObuilt DRUM Drop Spindles. It will lower your vehicle 2.5" and add 3/8" of track width to each side. They work with either stock drum brakes or our GEN 1 or GEN 2 BAD Series Brakes. Early model 2 bolt wheel cylinder backing plates will need a small grind on the back of the spindle where it touches the backing plate. These spindles would replace the factory spindles with part numbers 111405301 and 111405302.

Good - Individually purchase these spindles, based on budget and skill set - no tech support
Best - PRObuilt Drop Drum Spindles - Bolt-On - Tech Support Included

Assembled in the USA | Product updated 6/18/23 by Pete

Typical time to install - 2 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
10 in stock!

Classic VW Type 1 Link Pin Adjusters - 2450

A good way to lower a Classic Volkswagen Type 1 Beetle or Karmann Ghia with link pin front suspension ( 1949 through 1965) is utilizing adjusters in the center of the beam.

These adjusters will give you the ability to adjust your VW up and down a total of 7.5" when installed at 25 degrees up from parallel to the ground. This means you can go up to stock height at the highest setting and the ability to go down a total of 7.5", but you can set it anywhere you want within that range.

Do not believe the 50/50 garbage out there, it is a Band-aid idea that will only cause more harm. Your factory link pin suspension is designed to be at a stock height, with the arms at a 60 degree angle. The top arm is bottomed out on the stop, the stock shock is maxed out in extension and this is all assumed, that the factory torsions haven't lost any spring tension. (Theortically, if the 50/50 method was put in place with relaxed torsions, you are putting more stress on them to index them higher giving the vehicle an unstable ride. Would it lift it to stock height? Maybe. Would it be good advice to do this to keep your family safe? No.) Installing these adjusters at 25 degrees give you the best use of travel within the range of the factory working components.

There are three ways to lower your 1949 through 1965 Type 1. Good, Better, Best.

Good - Install these adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 6/19/23 by Pete

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
10 in stock!

Classic VW Type 1 Ball Joint Adjusters - 2451

A good way to lower a Classic Volkswagen Type 1 Beetle, Karmann Ghia or Type 181 Thing with ball joint front suspension ( 1966 through 1977) is utilizing adjusters in the center of the beam.

These adjusters will give you the ability to adjust your VW up and down a total of 7.5" when installed at 25 degrees up from parallel to the ground. This means you can go up to stock height at the highest setting and the ability to go down a total of 7.5", but you can set it anywhere you want within that range.

Do not believe the 50/50 garbage out there, it is a Band-aid idea that will only cause more harm. Your factory ball joint suspension is designed to be at a stock height, with the arms at a 60 degree angle. The stock shock is maxed out in extension and this is all assumed, that the factory torsions haven't lost any spring tension. (Theoretically, if the 50/50 method was put in place with relaxed torsions, you are putting more stress on them to index them higher giving the vehicle an unstable ride. Would it lift it to stock height? Maybe. Would it be good advice to do this to keep your family safe? No.) Installing these adjusters at 25 degrees give you the best use of travel within the range of the factory working components.

There are three ways to lower your 1966 through 1977 Type 1 and 181. Good, Better, Best.

Good - Install these adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 6/19/23 by Pete

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
10 in stock!

Six Shooter Clutch Adjustment Nut - 2820

There is a wing nut that, when functioning at its best, is a FIVE-out-of-TEN experience. This original nut would allow the VW owner to adjust his clutch feel to get the right amount of pedal to disengage the clutch. But most of the time, the OEM German wingnut is no longer on the vehicle, and a Chinese soft nut was chosen, and it feels like a week of not shaving your face. Heck, have you ever tried to adjust it when it was cold outside and you were twisting this wing nut, only for you to miss a twist, and like a propeller, it slaps your finger to the point of you letting out a Go#$&#)$)*_#@)_*$*it!!! Ya, we have all been there. We gave this trick little product a pretty cool name. Yeah, I am biased. We call it the Six Shooter Clutch Adjuster.

Available in Raw Steel, Powder Coated Black, Stainless Steel and NOW, Titanium!!!

Made in the USA | Product updated 11/21/23 by Pete

Typical time to install - 1/2 Hour | Install Guide | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
99 in stock!

Stage 1 PRObuilt Adjustable Shockless Link Pin Beam Complete - 2209

The BEST way to adjust a Classic Volkswagen Type 1 with link pin front suspension (1949 through 1965), is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 Shockless PRObuilt Beam is built on the Ultimate Beam platform. It's made six inches narrower than OEM for that low look and to allow for wider wheels, drop spindles, and disc brakes, that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here. This beam replaces the factory beam part number 113401021A.

Contrary to belief, the shockless beam can ride amazingly when using Airkewld's Delrin bushings. One tip, though, is if the vehicle is adjusted down, the ride will be rough, lift it an inch, and the ride improves.

Made in the USA | Product updated 6/15/23 by Pete

Typical time to install - 2 1/2 Hours | Install PDF Link | Install Video | Tools Needed

More Information

12 Weeks on Average

Seat Belt Anchor Reinforcement Kit - 2707

The Seat Belt. A fender washer is the most crucial part of keeping you in your place when driving. That's right. If you purchase seat belts, they come with eye bolts and a fender washer. Really? There has to be a better way, right?

We are introducing our new seat belt reinforcement kit! It is perfect for Classic Volkswagens that don't originally come with seat belts or for the vehicle with their pan halves replaced. Either way, get a clean AND safe look with these new beautifully crafted seat belt reinforcement kits.

Made in the USA | Product updated 6/9/23 by Pete

Typical time to install - 2 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Normally In stock - Will Ship ASAP
99 in stock!

Complete 1949-65 VW Beetle/Ghia PRObuilt Lowering Kit - 2170

A Great way to lower 1949 through 1965 Classic Volkswagen Type 1 Beetle and Karmann Ghia is with a Complete PRObuilt Lowering Kit from Airkewld. It lowers the vehicle from 2.50" or 63mm to 10" or 254mm up front and from stock height to 6" or 150mm in the rear.

Stock is a relative term. Even though you have not changed anything over time, you are assessing the vehicle's overall height as it currently sits. But it has relaxed over time, gradually starting to sag. This is what a stock Beetle at stock height looks like off the showroom floor, over a 6" gap between the top of the tire and the upper fender arch. Even the rear wheels have some positive camber.

Assembled in the USA | Product updated 6/23/23 by Pete

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed

More Information

3-5 Business Days on Average

Complete 1966-68 VW Beetle/Ghia PRObuilt Lowering Kit - 2172

The Great way to lower 1966 through 1968 Classic Volkswagen Type 1 Beetle and Karmann Ghia is with a Complete PRObuilt Lowering Kit from Airkewld. It lowers the vehicle from 2.50" or 63mm to 10" or 254mm up front and from stock height to 6" or 150mm in the rear.

Stock is a relative term. Even though you have not changed anything over time, you are assessing the vehicle's overall height as it currently sits. But it has relaxed over time, gradually starting to sag. This is what a stock Beetle at stock height looks like off the showroom floor, over a 6" gap between the top of the tire and the upper fender arch. Even the rear wheels have some positive camber.

Assembled in the USA | Product updated 6/23/23 by Pete

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed

More Information

3-5 Business Days on Average

Complete 1969-77 VW Beetle/Ghia PRObuilt Lowering Kit - 2173

The Great way to lower 1969 through 1977 Classic Volkswagen Type 1 Beetle and Karmann Ghia is with a Complete PRObuilt Lowering Kit from Airkewld. It lowers the vehicle from 2.50" or 63mm to 10" or 254mm up front and from stock height to 6" or 150mm in the rear.

Stock is a relative term. Even though you have not changed anything over time, you are assessing the vehicle's overall height as it currently sits. But it has relaxed over time, gradually starting to sag. This is what a stock Beetle at stock height looks like off the showroom floor, over a 6" gap between the top of the tire and the upper fender arch. Even the rear wheels have some positive camber.

Assembled in the USA | Product updated 6/23/23 by Pete

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed

More Information

3-5 Business Days on Average

Complete 1955-67 Type 2 VW Split Bus PRObuilt Lowering Kit - 2175

The Best way to lower 1955 through 1967 Classic Volkswagen Split Type 2 Bus is with a Complete PRObuilt Lowering Kit from Airkewld. It lowers the bus 3.50" or 89mm up front and 4" or 101mm in the rear from *stock.

Stock is a relative term. Even though you have not changed anything over time, you are assessing the vehicle's overall height as it currently sits. But it has relaxed over time, gradually starting to sag. This is what a stock bus at stock height looks like off the showroom floor, over a 5" gap between the top of the tire and the upper fender arch. Even the rear wheels have some positive camber.

The products supplied in this kit will lift the vehicle back up to stock height, then lower it by 3.5" and 4".

Assembled in the USA | Product updated 8/12/23 by Pete

Typical time to install - 24 Hours* | Install PDF Link | Install Video | Tools Needed

More Information

12 Weeks on Average

Gas Monkey Garage Beetle Package

Fits the following:

• 1949-1959 US Spec Type 1 Beetle-Bug-Fusca
• 1955-1959 US Spec Karmann Ghia
• 1960-1968 US Spec Karmann Ghia (with optional Transaxle package)

Gas Monkey Garage VW Build - Link

More Information

12 Weeks on Average

Complete 1973-74 VW Type 181 Thing PRObuilt Lowering Kit - 2174

Fits the following:

• 1973-1974 Type 181 Thing

Option 1 - 3.5" Drop up front - Consists of upper/lower arms, stock height spindles, eccentrics and hardware. Rear consists of new shorter rear shocks and adjusting torsion's.

Option 2 - 3.5"+ Drop up front - Consists of Ultimate Beam, torsion's, tie rods, oil shocks, upper/lower arms, stock height spindles, eccentrics and hardware. Rear consists of new shorter rear shocks and adjusting torsion's.

Option 3 - 6" Drop up front - Consists of upper/lower arms, drop drum spindles, eccentrics and hardware. Rear consists of new shorter rear shocks and adjusting torsion's.

Option 4 - 6"+ Drop up front - Consists of Ultimate Beam, torsion's, tie rods, oil shocks, upper/lower arms, drop drum spindles, eccentrics and hardware. Rear consists of new shorter rear shocks and adjusting torsion's.

More Information

3-5 Business Days on Average