The perfect pair for a new set of tie rods, these set of 4 jam nuts that are zinc plated in different colors to differentiate left and right work flawlessly with quality tie rod ends.

Assembled in the USA | Product updated 6/12/23 by Pete

Typical time to install - 1 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(1)

There is a wing nut that, when functioning at its best, is a FIVE-out-of-TEN experience. This original nut would allow the VW owner to adjust his clutch feel to get the right amount of pedal to disengage the clutch. But most of the time, the OEM German wingnut is no longer on the vehicle, and a Chinese soft nut was chosen, and it feels like a week of not shaving your face. Heck, have you ever tried to adjust it when it was cold outside and you were twisting this wing nut, only for you to miss a twist, and like a propeller, it slaps your finger to the point of you letting out a Go#$&#)$)*_#@)_*$*it!!! Ya, we have all been there. We gave this trick little product a pretty cool name. Yeah, I am biased. We call it the Six Shooter Clutch Adjuster.

Made in the USA | Product updated 6/9/23 by Pete

Typical time to install - 1/2 Hour | Install Guide | Install Video | Tools Needed

More Information

(102)

When installing a new master cylinder, you could clean up your old hardware, okay, OR you can replace it would some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/12/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(3)

When assembling your early link pin front end, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/12/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(2)

When installing your Ultimate Beam or factory front end, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Made in the USA | Product updated 6/12/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(8)

When updating the details on your Steering Box, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(3)

When updating the details on your Spring Plate Caps, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(4)

When updating the details on your Spring Plate to swing axle tube connections, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(6)

When updating the details on your Transaxle rebuild, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Made in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/4 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(7)

When updating the details on your pedal assembly, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/4 Hour | Install PDF Link | Install Video | Tools Needed

More Information

When rebuilding your 1949 through 1965 Type 1 Classic Volkswagen Chassis, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 3 Hours | Install PDF Link | Install Video | Tools Needed

More Information

(1)

When rebuilding your 1966 through 1968 Type 1 Classic Volkswagen Chassis, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 3 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Need to replace that adjuster bolt for your Ultimate or PRObuilt Beam? The exact bolt used in the build of your beam is available.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/4 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(1)

For several decades, castellated nuts required a cotter pin to hold the nut from backing off. Volkswagen has used them on their 36mm axle nuts from the start. Today, it changed by adding a reusable bolt kit with a nylon locking nut. Say goodbye to an archaic piece of tin and say hello to peace of mind, the Cotter Pin Replacement Bolt Kit.

Assembled in the USA | Product updated 6/9/23 by Pete

Typical time to install - 10 minutes | Install PDF Link | Install Video | Tools Needed

More Information

When updating the details on your rear shocks, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(4)