Complete PRObuilt Air Ride Kit - 1051

What's included?

• 4" Narrowed Stage 2 PRObuilt Beam - Complete with Air Ride Installed, PRObuilt steering system, ready for your brakes or our GEN 2 BAD Series Disc Brakes

• Swing Axle Bracket Kit
• 2500lb Air Bags
• Short Shocks
• Hardware Pack
• Printed Instructions

• Viair Compressor
• Pressure Switch
• Firestone 2 Gallon Tank
• Air Lift Manual Valves with Gauges
• 1/4 inch Air Line
• Hardware Pack
• Printed Instructions

What's recommended?

• If you want to run the disc brakes you already have, click here.
• If you have a pit or lift, you CAN install the rear kit with the body ON but if you do not, we recommend pulling it off to have access everywhere.
  

  ---

Kewl Features

• American made
• 7.5 inches of up-and-down movement

  ---

FAQ

• The Stage 2 PRObuilt Beam comes equipped with DRUM Drop Spindles, will my front disc brakes fit on my new beam? No. If you want to run the disc brakes you already have, click here.
• Do I need to do body mods to install this beam? No. The inside dimension is 29 13/16". That gives a clearance of 1/16" on each side. If the vehicle has been in an accident, it is possible that minimal massaging will be needed to install based on the size of buckle near the shock tower location.
• How do you narrow the beam 4" when I only have 1/2 inch on each side of my stock beam? We utilize the outer ends of the tubes and gusset outwards to give us the needed space. Here is a video that explains it.
• Do I need to send in a core? No. The PRO's have a few options for your cores. Check them out here.
• Will I need anything in addition to this assembly? No. It's as complete as it comes from the factory.
• Heaters will not work with out modification with this kit
• The exit ducts from the body might need to be trimmed to clear to fit your application.
• The front most brackets are slotted left to right along with the upper air bag mounts to allow for perfect adjustment.