Home > Products >

Classic VW Type 1 Link Pin Adjusters - 2450

Classic VW Type 1 Link Pin Adjusters - 2450
To view pictures of this component installed, scroll down and check out the tabs below



  
Alternative Views:
Airkewld Army Price: $78.54 Each

<-- Ask a PRO about this product here.

Click the on the option fields below for more information, if applicable.
(Minimum order):  2

Quantity in Stock:12


Availability:: Normally In stock - Will Ship ASAP
PART Number: 2450
Qty:

Description Complete Details
 
A good way to lower a Classic Volkswagen Type 1 Beetle or Karmann Ghia with link pin front suspension ( 1949 through 1965) is utilizing adjusters in the center of the beam.

These adjusters will give you the ability to adjust your VW up and down a total of 7.5" when installed at 25 degrees up from parallel to the ground. This means you can go up to stock height at the highest setting and the ability to go down a total of 7.5", but you can set it anywhere you want within that range.

Do not believe the 50/50 garbage out there, it is a Band-aid idea that will only cause more harm. Your factory link pin suspension is designed to be at a stock height, with the arms at a 60 degree angle. The top arm is bottomed out on the stop, the stock shock is maxed out in extension and this is all assumed, that the factory torsions haven't lost any spring tension. (Theoretically, if the 50/50 method was put in place with relaxed torsions, you are putting more stress on them to index them higher giving the vehicle an unstable ride. Would it lift it to stock height? Maybe. Would it be good advice to do this to keep your family safe? No.) Installing these adjusters at 25 degrees give you the best use of travel within the range of the factory working components.

There are three ways to lower your 1949 through 1965 Type 1. Good, Better, Best.

Good - Install these adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 6/19/23 by Pete

Related: Spindle to Spindle Assembled PRObuilt Beam | PRObuilt Arm Set | PRObuilt Steering Box

Typical time to install - 12 Hours | Install PDF Link | Install Video | Tools Needed
Null
What does this product fit?

  • 1949 through 1965 Type 1 Beetle-Bug-Fusca
    1957 through 1965 Karmann Ghia
    Kit cars with link pin suspensions

Accessories, check the box to include with your order.
Airkewld Merch Package
Airkewld Army Price: $65.00 Each

Add
Airkewld Merch Package

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent product February 25, 2020
Reviewer: tom landek from bridgeview, IL United States  
Well built product and easy to install.
I am very impressed with ease of installation and the quality of this product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great quality super excited to install them! July 20, 2018
Reviewer: Scott A Sandoval from Downers Grove, IL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excelent!! October 26, 2016
Reviewer: luis rodrigo fernandez kuhliger from distrito federal, mexico city Mexico  
Superb quality!!!!! And the service.... simply the best!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 great adjusters August 4, 2015
Reviewer: kipp beaver from gresham, OR United States  
Bought a set of these adjusters and they where easy to install . Gave great adjustability  options to my ride . Way worth the cost for the amount of drop you get to add to you bug . Thanks airkewld.

Was this review helpful to you?