2701 | VW Chassis Tunnel Inspection Plate Kit Clutch

List Price $37.49

Airkewld Army Price $29.99 Each

Have a question? <-- Ask a PRO about this product here.

Click the

on the option fields below for more information, if applicable.

Quantity in Stock:5

Availability:: Usually Ships in 24 to 48 Hours
PART #: 2701

A remedy recommended for many Classic Volkswagens is the clutch tube coming loose from the stationary bracket inside the chassis tunnel. For years, the hole saw, air chisel, was used to cut open the chassis and hose clamp or zip tie the tube back to the bracket. Now, you can fix it correctly with the Chassis Inspection Plate Kit. Cutting and welding are needed to do this job perfectly.

Made in the USA | Product updated 12/25/23 by Pete

Related: Six Shooter Clutch Adjuster | Seat Belt Anchors | Stainless Fuel Line Kits

Typical time to install - 2 Hours | Install PDF Link | Install Video | Tools Needed
Null

Kewl Features

Once this inspection plate has been installed, the ability to remove the door and change your cable without removing your pedal assembly makes this job easy.
You can quickly run airlines through the tunnel with this kind of access.
With this kind of access, you can run a new -6 AN braided hose through your tunnel.
You can run your stereo and additional wiring through the tunnel to avoid lumps in your carpets.

Tools - Amazon Tool Links

Angle Grinder
Center Punch
Step Bit
Air Saw
Welder
Impact Driver
Impact Phillips Bit

FAQ

Can this kit be used in multiple places on the chassis? Yes, but the panel's curvature will be different in different locations.
By cutting this hole, does this weaken my chassis if I get into an accident? If you get into an accident, are you worried about the chassis at that point? The short answer is No. Have we crumple-zone tested this to give you that kind of answer? No.