Home > YouTube > Chassis Builds
The PRO's will be adding films to this section that pertain to all of our current chassis builds. We will list all our chassis specific pages here if you would like to watch all our archived episodes. Make sure you are subscribed and you can do that here.

Swafford's 57 Karmann Ghia Chassis - Link

Avery's Shortened Kit Car Chassis - Link

Tellez's 62 Beetle Chassis - Link

Arreola's 74 Karmann Ghia Chassis - Link


DESCRIPTION

What a build!! This chassis has gone together amazing and we have to thank our preparation. This episode, we shorten the shift linkage. Pretty easy although it took M A T H to make it happen. Enjoy!

PRODUCTS USED IN THIS FILM

Shift Coupler - EMPI HD Coupler
Vintage Speed Shifter - Link
Curated Tool List - Link
Truss Bar - Link
Need a chassis like this? Check it out here - Link
Pre-order our Work Shirt - Link
Avery Chassis Build Series - Link


DESCRIPTION

After finalizing the pan halves install in the last film, we get into prepping the chassis for air ride. We start with installing the brakes on the transaxle, installing the spring plates on the chassis, installing the transaxle and bolting in the Stage 2 PRObuilt Beam. Then we bolt on the 17" Fury wheels and set it on the ground. This is going to be epic!

PRODUCTS USED IN THIS FILM

Swing Axle Air Ride Kit - Link
Freeway Flyer Transaxle - Link
Spring Plate Cap Stainless Steel Hardware - Link
Spring Plate ARP Stainless Steel Hardware - Link
Rear Disc Brake Kit - Link
Stage 2 PRObuilt Beam - Link
Front Disc Brakes - Link
17" Fury Wheels - Link
Need a chassis like this? Check it out here - Link
Pre-order our Work Shirt - Link


DESCRIPTION

Part 1 of 2, the Conclusion of the Avery Chassis is finally upon us. What an awesome build. This episode we tackle bubble flaring the brake lines, fuel lines, putting fluids in the car, clutch cable, rear calipers and seat belt anchors. ......and we are giving you a sneak peak of the chassis on all 4's! Enjoy!

PRODUCTS USED IN THIS FILM

Brake Line Stands - Link
Brake Lines - Link
Clutch Cable Shortener - Link
3/8" Braided Fuel Hose - 390006ERL - Link
Seat Belt Anchors - Link
Rear Disc Brake Kit - Link
Valvoline 80/90 Weight Transaxle Oil - Link
Need a chassis like this? Check it out here - Link
Pre-order our Work Shirt - Link
Avery Chassis Build Series - Link

TOOLS
Double Bubble Flare - Link
Brake Line Wrench - Link
Vibra-tite - Link
T-handle Allen Wrenches - Link

Drain Plug Socket
Amazon - Link
Snap-on - Link


DESCRIPTION

What's up Airkewld Army, it's your friend Pete.... with the final film in the Avery Chassis build! What a journey to turn the POS into a work of art, I am so pumped! I invite you to take a journey down memory lane here on this entire build to understand the complete effect of what we just did....WOW!

PRODUCTS USED IN THIS FILM

Flat Out Customs Pan Halves - Link
Vintage Speed Shifter - Link
Seat Belt Anchors - Link
Chassis Inspection Plate - Link
6" PRObuilt Shockless Beam - Link
BAD Series Disc Brakes - Link
PRObuilt Performance Transaxle - Link
Stainless Steel Chassis Hardware - Link
Six Shooter Clutch Adjuster Nut - Link
Truss Bar - Link
Need a chassis like this? Check it out here - Link
Pre-order our Work Shirt - Link
Avery Chassis Build Series - Link

DESCRIPTION

The 1962 Chassis for the Tellez family is off to powder coat after the PRO’s finalized the Air Ride install, the new eBrake Handle mount, chassis inspection plate and more. Enjoy!

PRODUCTS USED IN THIS FILM

Rear Air Ride Kit - Link
Complete Air Ride Kit - Link
Chassis Inspection Plate - Link
eBrake Handle Mount - Link
Wolfsburg West Pan Halves - Link
PRObuilt Work Shirt - Link
Need a chassis like this? Check it out here - Link
Tellez Chassis Build Series - Link