Once you have added the install to your cart, click the following kits that make sense for your build.

1966-1968 - Link
1969-1977 - Link
Type 3 - Link

(5)

These shocks fit fit many different Classic Volkswagen's with an IRS Axle rear suspension. Shock absorbers are without a doubt the brains of your suspension. Nothing influences how your car rides and handles more than its shock absorbers. These shocks measure 15.250" extended and 10.000" collapsed.

Two kinds of shocks are provided for our clients. These shocks replace the factory shocks with part number 113513031.

Sport - Soft riding shock great for a lowered VW.
Adjustable - Tunable shock great for the enthusiast that like to get a specific ride out of their VW.

Made in Mexico | Product updated 6/21/23 by Pete

Typical time to install - 1 Hour | Install PDF Link | Install Video | Tools Needed

More Information

(3)

Fits Classic Volkswagen Type 3's with 15"+ Wheels, AND these years/models;

1961 through 1973 Type 3 Squareback Notchback Fastback Type 34 Razor Ghia

We take for granted a vehicle stopping in an adequate amount of time. Classic Volkswagens don't have brakes that can be counted on, time after time, at least not on today's highways when needed most. It's time to change that. It's time to install an American-Made disc brake kit that exceeds expectations every time. It's time for a set of BAD Series Disc Brakes from your friends at Airkewld.

The GEN 1 set of BAD Series Brakes brings new life to a tried and true disc brake conversion. Any conversion offered by the PRO's will come with all the necessary parts to install; you will only need to supply the brake fluid and furnish the lug nuts required to fit your actual wheels. If you need to know what you need, check out this article.

Made in the USA | Product updated 6/11/23 by Pete

Typical time to install - 3 Hours | Install PDF Link | Install Video | Tools Needed

More Information

Fits Classic Type 3 Volkswagen's with a PRObuilt Beam with DRUM spindles, 15"+ Wheels

We take for granted a vehicle stopping in an adequate amount of time. Classic Volkswagens don't have brakes that can be counted on, time after time, at least not on today's highways when needed most. It's time to change that. It's time to install an American-Made disc brake kit that exceeds expectations every time. It's time for a set of BAD Series Disc Brakes from your friends at Airkewld.

The GEN 2 set of BAD Series Brakes brings new life to a tried and true disc brake conversion. Any conversion offered by the PRO's will come with all the necessary parts to install; you will only need to supply the brake fluid and furnish the lug nuts required to fit your actual wheels. If you need to know what you need, check out this article.

Made in the USA | Product updated 6/8/23 by Pete

Typical time to install - 3 Hours | Install PDF Link | Install Video | Tools Needed

More Information

The BEST way to adjust a Classic Volkswagen Type 3, is by installing a Stage 1 PRObuilt Conversion Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 PRObuilt Beam is built on the Ultimate Beam platform. It's made four inches narrower than OEM to allow for wider wheels, drop spindles, and disc brakes, that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here.

Made in the USA | Product updated 6/15/23 by Pete

Typical time to install - 6 Hours | Install PDF Link | Install Video | Tools Needed

More Information

(1)