Fits the following:
- 1968-1977 US Spec Type 1 Beetle-Bug-Fusca
- 1968-1977 US Spec Karmann Ghia
- 1971-1979 Super Beetle 1301 1302
- 1955-1963 Type 2 Bus Kombi Transporter Single Cab Double Cab**
- 1973-194 Type 181 Thing
- Type 3 Squareback Fastback Notchback Type 34 Razor Ghia
- Kit cars with long spline swing axle and IRS axle suspension
The PRO's Recommendations:- 14mm studs do not come pressed in. You will need to press in the studs after drilling out the holes to 19/32nds. If you use different studs, please measure before drilling or pressing in.
** Must have IRS or Swing Axle conversion installed
This kit will come with 2 drums, 2 loaded backing plates, seal kits and 10 14mm x 1.50 studs. It will fit all 1968-79οΎ Long axle-long spline and IRS application Beetle, Ghia, Type 3 and Thing. if you have lowered your Type 2 with a IRS kit that is NOT from a BAY bus, this kit will work for you. If you do not have the funds to purchase the BAD Series Disc brakes for the rear of your ride, we have come up with a solution. Airkewld's Ford/Toyota 5x4.50/114.3 Drum Brake kit. This kit will bolt to a swing axle or IRS Type 1 transmission. If you have the wide 5x205mm, we got you covered! Simply unbolt your rear drums and backing plates and install our BIG shoe backing plates that are completely rebuilt and our new rear drums. Adjust your e-brake cable, bleed and adjust your brakes and your done. Have questions, email us! Studs do not come pressed in, some models, might need to open up the stud holes before pressing in studs. [youtube]VQPOaCUQ89A[/youtube]
|