Fits the following with a 4x130mm Bolt Pattern:

• All VW's

PDF Instructions:

• Wheel Options Article - Link
• Wheels only come in 17x7 configurations

The PRO's Recommendations:

• Beetle/Ghia's need a 4" Narrowed beam and short axles, (Standard equipment on pre 65 vehicles) or Narrowed IRS arms (69 and later) to run the wheels staggered. (More wheel lip in the rear)
• 14mm Studs with Acorn seat lug nuts
• P205r40-17 Tires up front, P215r45-17 Tires in the rear
• Check out the details tab for more fitment information

Unique Starts Here Dealing with some of the finest wheels on the market, we know that it is difficult for some to attain them due to their cost and most of all, stay with in budget. With our knowledge in the "plus size wheels" side of the market, we wanted to create a wheel that would stay classic enough but still be cool. Introducing the 17 x 7 the 4x130mm Smoothie! Made in the USA, our 17" Smoothie passed DOT Specs and are now certified! The first aftermarket wheel in the VW industry with this certification! Our attention to detail pays off in styling that screams excellence. Custom built just for you, these stunning wheels are ready for BAD Series Brakes, they can enhance the highest tech Volkswagen. This wheel comes in a 4x130mm Vintage VW bolt pattern and in two configurations. 5.125 inch and 4.625 inch back spacings.

Recommended Front Applications 1949-79 US Spec Beetles & Karmann Ghias will need a 4 inch narrowed beam to be able to tuck these wheels with drop spindles and disc brakes with 5.125 inch back spacing wheels. Factory disc applications will need to shave casting marks on calipers, install our BAD Series Disc Brakes with narrower than factory calipers or add a 1/4" spacer.

Recommended Rear Applications 1949-65 US Spec Beetles & Karmann Ghias outfitted with short axles will not have to change anything in the rear and will run the 4.625 inch back spacing wheels to create the staggered look. 1966-68ﾠUS Spec Beetles will need to run the 5.125 inchﾠ back spacing models if the vehicle is currently running long axles in the rear. If you want to run the staggered look in the rear, you can run an 1.250 inch wider fender or change the axles out to the short axles from 49-65. Karmann Ghias can only run the 5.125 inch rear wheels with short axle or narrowed IRS arms. 1969-79ﾠUS Spec Beetles & Super Beetles will need to run the 5.125 inch back spacing models due to the IRS configuration. If you want to run the staggered look in the rear, you can run an 1.250 inch wider fender or change to narrowed diagonal arms that are 1 inch narrowed.

Type 2 Bus Applications 1955-79 US Type 2 Buses will need 5.125 inch back spacing wheels. Rear applications will need to be the same unless you have installed a short axle configuration in the rear. Then you can run the 4.625 inch back spacing wheels.

Porsche 356 Applications You can run the 5.125 inch fronts and 4.625 inch rear with out issues on the 356s up to 63.

Type 3 Applications will needﾠ 5.125 inch back spacing wheels up front and if outfitted with long axles or IRS, you will need to run the same wheels. If you convert to short axle, you can run the 4.625 inch back spacing wheels. If you have a custom suspension set up and would like to run a specific wheel, contact us for details.