Home > Products > Shocks >

Ball Joint Air Ride Shocks - 1501

Ball Joint Air Ride Shocks - 1501
To view pictures of this component installed, scroll down and check out the tabs below



 
List Price $279.99
Airkewld Army Price $239.99 Pair

<-- Ask a PRO about this product here.

Click the on the option fields below for more information, if applicable.

Quantity in Stock:9


Availability:: Usually Ships in 24 Hours
PART #: 1501
Qty:

Description Complete Details
 
These shocks fit the 1966 through 1977 Classic Volkswagen Type 1 Beetle and Karmann Ghia with a ball joint front suspension with an Ultimate Beam installed or our Front Air Ride Kit Installed. These shocks are sold as replacements for our kits.

Made in the USA | Product updated 6/22/23 by Pete

Related: Ultimate Narrowed/Adjustable Front Beam | Front Air Ride Kit | Stage 2 PRObuilt Air Ride Beam

Typical time to install - 1 Hour | Install PDF Link | Install Video |
Tools Needed
Null

What does this product fit?

  • 1966 through 1977 Type 1 Beetle-Bug-Fusca
    1966 through 1975 Karmann Ghia
    Mexican Beetle
    Fridolin
    Kit cars with ball joint suspensions

Accessories, check the box to include with your order.
Airkewld Sticker Sheet Airkewld Classic VW Drive-Train Shirt Air Ride Shock Fitting Kit - 1503
Airkewld Army Price $4.99 Each

Add
Airkewld Army Price $29.95 Each

Add
Airkewld Army Price $49.99 per Kit

Add
Airkewld Sticker Sheet Airkewld Classic VW Drive-Train Shirt Air Ride Shock Fitting Kit - 1503

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 December 6, 2021
Reviewer: daniel baldwin from north las vegas, NV United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 BJ front air shocks that fit! July 18, 2018
Reviewer: Bob E. from Dennis Port, MA United States  
My Deserter GT, essentially a street dune buggy needed a little adjustability up front. I tried other air shocks that didnt quite work and Im happy to say these fit, no interference and work!

I run a standard BJ front end with 2 1/2 inch drop spindles and get 4+ inches of travel using these shocks.   You might get more without springs, but I have some springs in place.

The bottom mount slid right on the stud, but I had to trim one side of the bottom shock bushing on each shock to gain room for a washer and nut on the mounting stud. It was a quick job with a saws-all but a hack saw would work also. Thats all it needed and it clears the trailing arm just fine.

Pretty simple to install or just like regular shocks. I did mount the shocks with the air nozzle to the rear as that seemed to make sense to me.

They might seem more expensive but for my money, yes theyre worth it because they work.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Replacing a leaking shock April 13, 2015
Reviewer: Bill Freckman from Azle, TX United States  
All in all, these shocks are really good. They fit well and they work to a "T". I don't drive my car daily so I think this set up the one shock that leaked. Maybe a bit of dryness....

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Love it October 6, 2014
Reviewer: Diego from Poway, CA United States  
Everything was smooth.. And the parts are really cool!!
They know their stuff.. Worth the cost..!

Was this review helpful to you?

  0 of 3 people found the following review helpful:
 
5 of 5 It is satisfied. January 11, 2014
Reviewer: Shigehisa Kusano from tachikawa-shi, tokyo Japan  
I cannot use English.
However, it was able to use in comfort.
As it is, a mailing cost is high.
However, since time was not taken but it arrived satisfactorily, I appreciate.
I would like to use in the future.


Was this review helpful to you?