Gen 1 Classic 1955-63 VW Bus Front Disc Brake Conversion Kit - 4300

We take for granted a vehicle stopping in an adequate amount of time. Classic Volkswagens don't have brakes that can be counted on, time after time, at least not on today's highways when needed most. It's time to change that. It's time to install an American-Made disc brake kit that exceeds expectations every time. It's time for a set of BAD Series Disc Brakes from your friends at Airkewld.

The GEN 1 set of BAD Series Brakes brings new life to a tried and true disc brake conversion. Any conversion offered by the PRO's will come with all the necessary parts to install; you will only need to supply the brake fluid and furnish the lug nuts required to fit your actual wheels. If you need to know what you need, check out this article.

Made in the USA | Product updated 1/15/24 by Pete

Related: Rear Disc Brake Kits

Typical time to install - 3 Hours | Install PDF Link | Install Video | Tools Needed

• 
  
  
  
  
  

The rotors consist of three parts; the hub, the bolt pattern, and the rotor. All parts are made in the USA with high-end CNC machines. The BAD Series rotors have a lifetime warranty as well. If you wear one out, we will send you a new one free; pay shipping. These hubs allow the interchanging of bolt patterns. What does this mean? If you order them with a Chevrolet 5x4.75 bolt pattern and you want to install Porsche wheels a few months later, you can! All it takes is removing the bolt patterns from the rotors and installing the new ones.

Track Width
Wide 5x205mm adds 1/8" of track to each side as all others are zero.

Parts that come in this kit

• Gen 1 BAD Series Rotor Assemblies with the bolt pattern of your choice equipped with 14mm x 1.50 studs. You will need to know if your wheels take a specific lug nut to work.
• Premium Roller Bearings
• Premium Grease Seals
• Caliper Brackets
• Wilwood Calipers in the color of your choice
• Mounting hardware, shims and loctite
• Stainless Steel Brake Hoses
• Dual Circuit Disc Master Cylinder
• OnTop Reservoir
• 2 Prong Brake Light Switch
• Master Cylinder Spacer

What doesn't come in the kit

• Thrust washers
• Spindle nuts
• Speedo Cable E-clip
• Lug Nuts - Link to find out what you need

Recommendations
Get the bearings pressed in by the PRO's to make installation easier.

Kewl Features

• These hubs allow the interchanging of bolt patterns. What does this mean? If you order them with a Chevrolet 5x4.75 bolt pattern and you want to install Porsche wheels a few months later, you can! All it takes is removing the bolt patterns from the rotors and installing the new ones.

FAQ

• Do you sell thrust washers and spindle nuts to complete this as a new install? Currently, no.