Fits the following:
Tutorial found here -> https://www.airkewld.com/kb_results.asp?ID=25 and view the product line here http://www.airkewld.com/category-s/2053.htmPosted by Airkewld on Thursday, September 12, 2013
Tutorial found here -> https://www.airkewld.com/kb_results.asp?ID=25 and view the product line here http://www.airkewld.com/category-s/2053.htm
These kits fit the 1961-73 US Spec Type 3 Fastback, Notchback and Squareback.ﾠ You need to have 15" and larger wheels for our disc brakes to work. You will need drum spindles for this kit to fit. Do these brakes add track width? This kit does not add track width with small lug configurations that include 4x130mm, 5x130mm, 5x4.50 and 5x4.50. Wide 5 kits at 3/8" to each side.
BAD Series rotors in a bolt pattern of your choice with cross drilled rotors, Wilwood 2 Piston calipers, pads, seals, hardware, caliper brackets, and dust caps.
We recommend the installation kit with every disc brake kit we offer. This kit comes with bearings, stainless steel flexible brake hoses and a new brake light switch. We recommend a late model 1973 and later T3 master cylinder that can be purchased locally from Kragen/Schucks/AutoZone.
Why BAD Series Brakes?
Are you tired of adjusting your brakes just to have a subpar brake feel? Do you have to pump your pedal 100 yards before a stop light? Are you trying to fit custom wheels on your ride? Are you tired of buying cheap imported parts? If you answered yes to any of the above questions, the BAD Series Disc brake kit is what you need! My biggest recommendation is for you to only spend your money once. In doing that, make sure you get all the parts needed to do the install right the first time.
Pros versus Cons
Warranty, weight, options, made in the USA and the ability to use any spindle, dropped or stock height. A lifetime warranty on our rotors as well. Some of our competitor?s disc brake kits can be in excess of 76lbs per axle. Our heaviest kit weighs in at 48lbs. Our rotors, Wilwood calipers, brackets, etc. are made in the USA. No one else can say that.
The biggest differences are the rotors. The rotors are made of three parts; hub, the bolt pattern and the rotor. All these parts are made in the USA with high end CNC machines. These rotors allow you to use year specific bearing seals and dust caps. The BAD Series rotors have a lifetime warranty as well. If you wear one out, we will send you a new one free, just pay shipping. These hubs allow the interchanging of bolt patterns. What does this mean? If you order them with a Chevrolet 5x4.75 bolt pattern and a few months later you want to install Porsche wheels, you can! All it takes is removing the bolt patterns from the rotors and installing the new ones. Each pattern is sold separately. The last difference is the ability to add a performance caliper to your car.